Advantages of Using Torque Llimiters on Crushers

Various crushers are widely used in glass factories to break raw materials, broken glass, etc. During use, hard iron objects often enter and cause overload. Using a torque limiter instead of a coupling when installing the crusher has the following advantages:

(1) Since the crusher starts with large inertia, large starting current, long duration, large starting torque, and harsh working conditions, only by increasing the motor model and motor capacity during design can the starting needs of the crusher be met, resulting in waste of equipment and energy. A torque-limiting coupling is required to enable the motor to start at a state close to the rated torque. The motor power can be fully exerted during operation, which can reduce equipment cost and power consumption after using this kind of safety coupling.

(2) The unevenness of the crushed materials determines the unevenness of the working load of the crushing equipment. The load changes greatly, which is one of the characteristics of various crushing equipment. During the production process, especially in the initial stage of production, due to the glass production The status is unstable and the crusher often gets stuck, causing equipment accidents and causing inconvenience and losses to the manufacturer. After selecting the torque limiter, the variable heavy-load start is changed to no-load start, which can protect the equipment from overload, prevent the motor from burning and damage, and extend the service life of the equipment.

3) Strong impact and vibration will be generated during the on-board crushing work, and the starting inertia will be large. The situation will be more prominent when overload is encountered, which will have an impact on the operation and service life of the equipment. After using the torque limiter, the working machine and the load is a flexible connection, which can effectively isolate vibration and impact, and reduce damage to hammer heads and other parts.

In summary, the torque limiter has advantages such as smooth start, reduced impact, and overload protection. The torque limiter is an important accessory for glass factory crushers.